Bosch TDS 1216 - Manuale d'uso - Pagina 7

11

en

ψОПorО usТnР tСО Тron Пor tСО irst tТЦО

RОЦoЯО anв ХaЛОХs or protОМtТЯО МoЯОrТnР ПroЦ

tСО soХОpХatО (1γ)έ

For further details on the following actions, please refer

to the related chapters in this user manual.

إΝ АТtСΝ tСОΝ ТrШЧΝ uЧЩХuРРОН,Ν iХХΝ tСОΝ tКЧФΝ (11)Ν ШПΝ tСОΝ ТrШЧΝ

with tap water and set the temperature control (15) to

“max”.

• Plug in the appliance to the mains.
• When the iron has reached the desired temperature,

tСОΝРrООЧΝХТРСtΝ(η)ΝstШЩsΝضКsСТЧРΝКЧНΝtСОΝМХОКrΝХТРСtΝ(γ)Ν

stКrtsΝضКsСТЧРέΝύrТЩΝtСОΝСКЧНХОΝ(1)ΝКЧНΝsОtΝtСОΝstОКЦΝ

control to the maximum position “max”.

• Hold the iron horizontally and repeatedly press the

shot of steam button (6). Any residue may come out

of the soleplate (13).

• If necessary, carefully clean the soleplate (13) down

with a dry, folded cotton cloth.

إΝ АСОЧΝ usТЧРΝ tСОΝ stОКЦΝ ПuЧМtТШЧΝ ПШrΝ tСОΝ irstΝ tТЦО,Ν НШΝ

not use it on your laundry, as there may still be dirt in

the steam dispenser.

إΝ АСОЧΝturЧОНΝШЧΝПШrΝtСОΝirstΝtТЦО,ΝвШurΝЧОаΝТrШЧΝЦКвΝ

smell and emit a little smoke and a few particles; this

will stop after a few minutes.

όТХХТnР tСО аatОr tanФ

(1)

UnpХuР tСО Тron ПroЦ tСО ЦaТns!

إΝ τЩОЧΝtСОΝiХХТЧРΝШЩОЧЧТЧРΝХТНΝ(λ)έ

• ІОЯОr iХХ ЛОвonН tСО ХОЯОХ ЦarФ Пor ЦaбТЦuЦ

iХХТnР (1β)έ

• Use only clean water from the tap without mixing

anything with it. The addition of other liquids, (unless

recommended by Bosch) such as perfume, will

damage the appliance.

χnв НaЦaРО МausОН Лв tСО usО oП tСО aПorОЦОnά

tТonОН proНuМts аТХХ ЦaФО tСО РuarantОО ЯoТНέ

• Do not use condensation water from tumble dryers,

air conditioning systems or similar. This appliance

has been designed to use normal tap water.

• To prolong the optimum steam function, mix tap water

with distilled water 1:1. If the tap water in your district

is very hard, mix tap water with distilled water 1:2.

You can inquire about the water hardness with your

local water supplier.

SОttТnР tСО tОЦpОraturО

(β)

TСО tОЦpОraturО МontroХ (1η) aНУusts tСО tОЦpОraturО

oП tСО soХОpХatО (1γ)έ

• Check the temperature instructions shown on the

care label of the garment you are ironing.

• Set the temperature control (15) to the corresponding

position by lining it up with the temperature index (14)

on the iron:

•

Synthetics

••

Silk-Wool

•••

Cotton-Linen

• Sort your garments based on their care labels, always

starting with clothes that have to be ironed at the

lowest temperature.

• If you are unsure what type of material the garment

is made from, start ironing on the lowest temperature

setting and increase accordingly. If the garment is

made from mixed fabrics, set the temperature for the

most delicate material.

• For silk, woollen or synthetic materials iron the

reverse side of the fabric to prevent shiny patches.

Avoid using the spray function to prevent stains.

SОttТnР tСО stОaЦ aЦount (γ)

Your iron is equipped with a steam setting selection

button

(ζ)

and with indicator lamps

(η)

showing the

steam setting, according to the table below:

Steam

setting

eco

max

steam off

Indicator

lamps

���

Green

���

Red

���

Off

Steam can be generated by gripping the handle (1), or

by pressing the steam activation button (2).
If the

“

eco

”

steam mode is selected, the energy

consumption of the appliance will be reduced by means

of reduction of electricity and water consumption. A

good ironing result can be obtained on this setting for

most garments.
The steam setting can be changed by pressing the

steam setting selection button (4). The iron runs through

the following cycle:

eco max steam off

SОnsorStОaЦ

The “SensorSteam” function automatically switches

off the iron when the handle is no longer gripped, thus

increasing safety and energy saving.

АСОn pХuРРТnР tСО Тron Тn, НurТnР tСО irst ЦТnutОμ

• The soleplate (13) heats up to the temperature

corresponding to the selected setting.

• The steam generation is blocked.

إΝ TСОΝРrООЧΝХКЦЩΝ(η)ΝضКsСОsέ