Mitchell Acoustics USTREAMGO - Manuale d'uso - Pagina 17
Altoparlante senza fili Mitchell Acoustics USTREAMGO – Manuale d'uso, leggi gratuitamente online in formato PDF. Speriamo che questo ti aiuti a risolvere eventuali dubbi. Se hai ulteriori domande, contattaci tramite il modulo di contatto.
ITALIANO
ITALIANO
© Mitchell Acoustics 2021 uStream Go IB Ver 1.0
Tabella dei contenuti
Prima dell'uso
Si prega di leggere attentamente questo manuale di istruzioni prima di utilizzare il dispositivo e di conservarlo
per ulteriori riferimenti. Seguendo e rispettando tutte le informazioni contenute in questo manuale di istruzioni
si manterrà questo prodotto in buone condizioni e si garantirà un funzionamento sicuro. Questo manuale di
istruzioni contiene informazioni su come far funzionare e mantenere questo dispositivo. Nel caso in cui un
componente richieda manutenzione, assistenza o riparazione, si prega di consultare un rivenditore quali
fi
cato o
un tecnico dell'assistenza.
1 Guida Rapida
2 Uso previsto
3 Informazioni sulla sicurezza
4 Nella scatola
5 Descrizione delle parti
6 Impostazione e uso
Accensione
Connessione TWS (True Wireless Stereo)
Connessione Bluetooth
Connessione a un dispositivo intelligente da usare come
sorgente sonora preferita
Collegamento di altri dispositivi
7 Disposizione
8 Speci
fi
che
9 Dichiarazione di conformità
88
90
91
92
93
96
96
97
98
98
99
100
101
102
ENGLISH
ENGLISH
© Mitchell Acoustics 2021 uStream Go IB Ver 1.0
23 of 106
22 of 106
9. Declaration of Conformity
Mitchell Acoustics as manufacturer certi
fi
es that the following designated
product
Mitchell Acoustics uStream Go (AB-T15) Bluetooth Stereo Speakers
are in full conformity with
ErP Directive
2009/125/EC
Commission Regulation: (EC) No. 1275/2008 (EU) No. 801/2013
Test Standard EN 50564:2011
RoHS
directive 2011/65/EU and the amendment directive (EU) 2015/863
EMC
ETSI EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-17 V3.2.4 (2020-09)
EN 55032:2015+A11:2020, EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
The designated products were subject to sample testing for which
RED (Radio Equipment Directive) 2014/53/EU
EN 62479:2010, EN 62368-1:2014+A11:2017, EN 301 489-1 V2.2.3, (draft) EN 301 489-17
V3.2.2, EN 300 328 V2.2.2
Shenzhen NTEK Testing Technology Co., Ltd
1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street,
Bao'an District, Shenzhen 518126 P.R.China.
issued test reports numbered:
S21070800401001, S21070800401002, S21070800401003, S21070800402001,
S21070800403001
And therefore the products comply with the essential
requirements and the provisions of the EU Directives.
RoHs
Mitchell Acoustics has a policy of appointing independent 3
rd
party specialists to advise on manufacturing to ensure
that manufacturing partners comply with product material content testing; seeking con
fi
rmation from suppliers that
materials meet the RoHs standards, and have remedial and replacement programs are in place, and that
manufacturers have procedures in place for identifying, segregating and replacing compliant from non-compliant
materials
The declaration is the sole responsibility of the manufacturer / importer.
The reports are held on
fi
le at :-
Mitchell Acoustics Limited
Turner House, 9-10 Mill Lane, Alton, Hants GU34 2QG UNITED KINGDOM
Date: 15th Jan 2022
Signed:
Paul Mitchell - Director
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
ff
and on,
the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di
ff
erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
10
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna installation instructions and consider removing
the no-collocation statement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential harmful
interference to co-channel mobile satellite systems.
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850
MHz shall be such that the equipment still complies with the e.i.r.p. limits speci
fi
ed for point-to-point and non-point-
to-point operation as appropriate.
CAUTION! Any changes or modi
fi
cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part
of your body.
"Caricamento dell'istruzione" significa che è necessario attendere finché il file non è caricato e pronto per la lettura online. Alcune istruzioni sono molto grandi e il tempo di caricamento dipende dalla velocità della tua connessione a Internet.
Altri modelli di altoparlanti senza fili Mitchell Acoustics
-
Mitchell Acoustics USTREAMONEBK
-
Mitchell Acoustics USTREAMONEWH