Mitchell Acoustics USTREAMGO - Manuale d'uso - Pagina 13

ITALIANO

ITALIANO

© Mitchell Acoustics 2021 uStream Go IB Ver 1.0

93 of 106

92 of 106

4. Nella scatola

Ecco cosa troverete nella scatola.

Si prega di controllare che tutte queste parti siano presenti prima di
procedere. Si prega di informare il vostro rivenditore se qualche parte
manca o è danneggiata.

2 x altoparlanti uStream Go

1 x cavo da USB-2.0 a "Y" doppio USB-C

5. Descrizione delle parti

FRONT

1. Griglia dell'altoparlante anteriore

FONDO

2. Driver bass re

fl

ex

ENGLISH

ENGLISH

© Mitchell Acoustics 2021 uStream Go IB Ver 1.0

17 of 106

16 of 106

6. Set Up & Use

Power Up

1. Each speaker contains a built-in lithium-ion battery which must be

charged fully before use.

2. Find the supplied USB-A to USB-C ‘Y’ cable and connect the USB-A

end to a power supply and the 2 USB-C ends to the USB-C socket on
the rear of each speaker. (Charging takes 9 hours per speaker with a
2A charger) LED indicator will show red colour while charging and
will turn o

ff

when fully charged.

3. Power on each speaker by pressing on the rear of each speaker

for 2 seconds. Make sure to power on each speaker within a few
seconds of each other to ensure the auto-pairing function works
correctly.

4. The speaker powered on FIRST and will always be the Left channel

5. Con

fi

rmation will be audible. ‘Power on’ with con

fi

rmation of default

mode, ‘Bluetooth’

6. The LED status indicator will blink Blue on both speakers until they

are paired to each other. Once paired, the LED will continue to blink
blue on the LEFT speaker (and will turn o

ff

on the right speaker) until

a Bluetooth source is connected.

7. If there is no Bluetooth or audio input within 15 minutes, the

speaker will automatically power o

ff

.

TWS (True Wireless Stereo) Connection

1.

When

fi

rst powered on, the speakers will attempt to pair

automatically so these steps are only required if manual pairing is
required.

2. Make sure that the speakers do not have an active Bluetooth

connection with a device.

3. Press the PR/PL/PA button on Speaker 1 (Left speaker) to initiate the

automatic pairing mode between the two units. There is a voice
con

fi

rmation ‘Connecting to Speaker 2’ followed by ‘Speaker 2

connected’.

NB: In True Wireless Stereo mode, only ‘Speaker 1, LEFT’ supports AUX /
LINE IN connections. It is not necessary to complete the TWS steps above
for each use. Once completed during initial setup, the speakers will
automatically connect to each other.